INCH-POUND
MIL-DTL-28619D
20 October 1997
SUPERSEDING
MIL-A-28619C(YD1)
26 August 1994
DETAIL SPECIFICATION
ANCHORS, STATO MOORING, 200 TO 15,000 POUNDS
This specification is approved for use by all Departments and
Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers stato mooring anchors, including stabilizers, wedges, and
palm extensions.
1.2 Classification. The anchor, with stabilizers, wedges, and palm extensions, should be one of
the following classes, as specified (see 6.2):
Class 1:
200 pound (lb) (91 kilogram (kg)) nominal weight.
Class 2:
3,000 lb (1 361 kg) nominal weight.
Class 3:
6,000 lb (2 722 kg) nominal weight.
Class 4:
9,000 lb (4 083 kg) nominal weight.
Class 5:
12,000 lb (5 443 kg) nominal weight.
Class 6:
15,000 lb (6 804 kg) nominal weight.
Beneficial comments, recommendations, additions, deletions, clarifications, etc. and any data
which may improve this document should be sent to: Commanding Officer (Code 15E2), Naval
Construction Battalion Center, 1000 23rd Avenue, Port Hueneme, CA 93043-4301, by using the
Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this
document or by letter.
AMSC N/A
FSC 2040
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business