MIL-DTL-28619D
ANCHOR, STATO MOORING
Class:
Nominal weight (lb):
(kg):
Holding power ratio: Mud:
15:1
Sand:
20:1
Year fabricated:
Manufacturer's name:
U.S. NAVY
3.10 Interchangeability. All units of the same classification furnished with similar options under a
specific contract shall be identical to the extent necessary to ensure interchangeability of
component parts, assemblies, accessories, and spare parts.
3.11 Workmanship.
3.11.1 Steel fabrication. The steel used in fabrication shall be free from kinks, sharp bends, and
other conditions which would be deleterious to the finished product. Manufacturing processes
shall not reduce the strength of the steel to a value less than intended by the design.
Manufacturing processes shall be done neatly and accurately. All bends shall be made by
controlled means to ensure uniformity of size and shape.
3.11.2 Bolted connections. Bolt holes shall be accurately punched or drilled and shall have the
burrs removed. Washers or lockwashers shall be provided in accordance with good commercial
practice, and all bolts, nuts, and screws shall be tight.
3.11.3 Welding. Welding procedures shall be in accordance with AWS D1.1 for dynamically
loaded structures. The surface of parts to be welded shall be free from rust, scale, paint, grease,
or other foreign matter. Welds shall be of sufficient size and shape to develop the full strength of
the parts connected by the welds. Welds shall transmit stress without permanent deformation or
failure when the parts connected by the weld are subjected to proof and service loading.
3.11.4 Forgings. Forgings shall be of uniform quality free of detrimental flash, scale, cracks, hard
spots, cold shuts, or other defects which might render the forging unsound for the intended use.
4. VERIFICATION
4.1 Classification of inspections. The inspection requirements specified herein are classified as
follows:
a. First article inspection (see 4.2).
b. Conformance inspection (see 4.3).
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business