MIL-DTL-613D
4.6 First Article Inspection.
4.6.1 Weight. The Weight shall be as specified in this specification for type.
4.6.2 Chemical analysis. Chemical analysis shall be as specified in this specification for type.
4.6.3 Physical properties. Physical properties shall be as specified in this specification for type.
4.6.4. Zinc-coating. Zinc coating shall be as specified in this specification for type.
4.6.5 Varnish coating. Varnish coating shall be as specified in this specification for type.
4.7 Possible test failures. Possible test failures are defined as follows:
a. Chemical analysis:
(1) Chemical composition not as specified for type.
b. Physical properties:
(1) Tensile strength less than minimum value for type.
(2) Elongation less than minimum requirement for type.
(3) Evidence of cracks or fracture when bent cold as required.
c. Weight:
(1) Not within specified limits.
d. Tests for zinc-coating (hot-dip or electro-deposited as applicable):
(1) Coating nonconforming; thickness less than allowable minimum; nonadherent, evidence of
coat flaking off or separation from basis metal; evidence of corrosion when tested (when
applicable).
e. Varnish:
(1) Varnish not having proper color as specified in 3.5.3.1.
(2) Varnish not flexible as specified in 3.5.3.2.
(3) Varnish not adhering as specified in 3.5.3.3.
(4) Varnish not resistant to water as specified in 3.5.3.4.
5. PACKAGING
5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in the
contract or order (see 6.2). When packaging of materiel is to be performed by DoD or in-house contractor
personnel, these personnel need to contact the responsible packaging activity to ascertain packaging
requirements. Packaging requirements are maintained by the Inventory Control Point's packaging
activities within the Military Service or Defense Agency, or within the military service's system commands.
Packaging data retrieval is available from the managing Military Department's or Defense Agency's
automated packaging files, CD-ROM products, or by contacting the responsible packaging activity.
12
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business